CCNA - CCNP - Training

Become CISCO Certified

1- CCNA ( Cisco Certified Network Associate )
2- CCNP ( Cisco Certified Network Professional )

CCNA Course Contents:                     Part 1. Routing

  1. How to attach a Router with a PC or Computer.
  2. Router Modes
  3. Changing Hostname
  4. Configuring Date & Time
  5. Setting a Banner
  6. Displaying Running Configuration
  7. Line Console Password
  8. Line VTY Telnet password
  9. Auxiliary Line Password
  10. Password for Privileged mode
  11. Secret Password for Privileged
  12. Remove line console password
  13. Checking System Flash
  14. IOS Version & Configuration Register Value
  15. Checking Router Interfaces & IP Address
  16. Assigning IP Address to an Interface
  17. Enabling an Interface
  18. Administratively shutting down an interface
  19. saving running configuration to TFTP Server
  20. Saving running configuration to Nvram
  21. Saving Starup-Configuratio to TFTP Server
  22. Copying IOS/Image from router to TFTP server
  23. Erasing Flash Memory
  24. Copying IOS/Image from router to TFTP Server
  25. Erasing Flash Memory
  26. Copying IOS/Memory from TFTP to Router
  27. Configuring Startup Configuration from TFTP Server to Router
  28. Configuring Router Interfaces
  29. Ping & Extended ping
  30. Cisco Discovery Protocol (CDP)
  31. How to Telnet a Router
  32. Static Router
  33. IP Naming (Using Host Table)
  34. IP Naming (Using DNS)
  35. Dynamic Routing using RTP (Routing Information Protocol)
  36. Configuration RipV2
  37. Configuration IGRP
  38. Configuration EIGRP
  39. Configuration OSPF Single Area
  40. Configuring OSPF Multiple Areas
  41. Redistributation of Routing Protocols
  42. Standard IP Access Control list
  43. Extended IP Access Control List
  44. Named IP Access Control list
  45. Static & NAT (Network Address Translation)
  46. Dynamic NAT
  47. Network Address Translation
  48. PAT (Port Address Translation)/Overloading
  49. Frame relay (Hub-&-Spoke Topology)/Dynamic Mapping/Inverse ARP
  50. Frame Relay (Hub & Spoke Topology)/Static Mapping/Inverse ARP

CCNA Course Contents:     Part 2.Switching

  1. Changing Host Name
  2. Displaying Running-Configuration
  3. Line Console password
  4. Line VTY Password
  5. Password For Privileged mode
  6. Secret (Encrypted password For Privileged Mode)
  7. Removing Line console Password
  8. Removing Password for Privileged EXEC Mode
  9. Removing Secret Password
  10. Checking System Flash
  11. Switch Hardware Information
  12. Switch Ports Status
  13. MAC Address Table
  14. Configuring Speed & Mode of and Interface
  15. Default VTP Configuring Values of a switch
  16. Configuring VTP Server Mode
  17. Configuring VTP Client Mode
  18. Configuring VTP Transparent Mode
  19. Configuring VTP Domain
  20. VTP password
  21. VLANS
  22. Switch Port Trunk & Access Modes
  23. Modes
  24. Switch Port Dynamic desirable and auto modes
  25. InterVlan Routing (Router On a stick)
  26. Port Security
  27. Port Security with Sticky Mack Address
  28. Spanning Tree Protocol (STP)
  29. Selection of Ports by Changing’s Cost of interfaces/ports

Get Fully Training From High Qualified Teachers

For More Information Contact:
0302 3440304

Programms & Courses:

Our Patner Sites

Sleek Systems | Sleek Marriage | Free Legal Counselling
Sleek Articles | Sleek Career | Sleek Sight | Sleek Classified
Copyright © 2016 Education Center.
All Rights Reserved
  1426-B
Near Tanki No.1 Chenone Road,
Peoples Colony # 1, Faisalabad.
  Tel : +92-345-7846833,0321-6079799
Fax : +92-41-8736257

www.thescops.com